End Mills / Carbide End Mills

Jump to Top of Filters

Carbide End Mills

Carbide End Mills

Find Your High Quality Carbide End Mills Below

 

Reset All Filters
7555 Products: Page 19 of 303
Products per Page:
≪◂
123 ... 17182021 ... 301302303
▸≫
 
Image
SKU #
DIA
----
LOC
SHK
----
OAL
CR
----
NL
Flutes
-------
Angle
Description
Price $
--------
QTY OH
QTY
Square End Mill: Carbide, 2 Flute, Standard Length
7/8"
1-1/2"
7/8"
4"
N/A
2
7/8" Square End Mill Carbide 2 Flute 30° Helix Standard Length Uncoated TITAN DIA=7/8" LOC=1-1/2" OAL=4" SHK=7/8"
$269.12
22
""
9/16"
1-1/4"
9/16"
3-1/2"
N/A
4
9/16" Square End Mill Carbide 4 Flute 30° Helix Standard Length TiCN Coated GWS DIA=9/16" LOC=1-1/4" OAL=3-1/2" SHK=9/16"
$84.62

Call

Micro Square End Mill: 2 Flute, Standard Length
0.014"
0.042"
1/8"
1-1/2"
N/A
2
0.014" Micro Square End Mill Carbide 2 Flute 30° Helix Standard Length AlTiN Coated TITAN DIA=0.014" LOC=0.042" OAL=1-1/2" SHK=1/8"
$32.32
50
Ball End Mill: Carbide, 3 Flute, Long Length
1/8"
3/4"
1/8"
2-1/4"
Ball
3
1/8" Ball End Mill Carbide 3 Flute 30° Helix Long Length AlTiN Coated TITAN DIA=1/8" LOC=3/4" OAL=2-1/4" SHK=1/8"
$24.07
14
TITAN USA Corner Radius End Mill Series 744
1/2"
2"
1/2"
4"
.015"
4
1/2" Corner Radius End Mill Carbide 4 Flute 30° Helix Long Length AlTiN Coated TITAN LOC=2" OAL=4" SHK=1/2" CR=.015"
$110.75
18
Micro Square End Mill: 4 Flute, Stub Length
0.025"
0.038"
1/8"
1-1/2"
N/A
4
0.025" Micro Square End Mill Carbide 4 Flute 30° Helix Stub Length Uncoated TITAN DIA=0.025" LOC=0.038" OAL=1-1/2" SHK=1/8"
$24.07
1265
Micro Corner Radius End Mill: 4 Flute, Standard Length
0.060"
0.180"
1/8"
1-1/2"
.010"
4
0.060" Micro Corner Radius End Mill Carbide 4 Flute 30° Helix Standard Length Uncoated TITAN CR=0.010" LOC=0.180" OAL=1-1/2" SHK=1/8"
$37.51
245
Micro Ball End Mill: 4 Flute, Standard Length
0.021"
0.063"
1/8"
1-1/2"
Ball
4
0.021" Micro Ball End Mill Carbide 4 Flute 30° Helix Standard Length Uncoated TITAN DIA=0.021" LOC=0.063" OAL=1-1/2" SHK=1/8"
$19.03
50
Square End Mill: Carbide , 4 Flute
1/32"
1/8"
1/8"
1-1/2"
N/A
4
1/32" Square End Mill Carbide 4 Flute 30° Helix Standard Length Uncoated TITAN DIA=1/32" LOC=1/8" OAL=1-1/2" SHK=1/8"
$13.14
789
TITAN USA Chamfer Mill Series 860
3/16"
.137"
3/16"
2-1/2"
N/A
2
3/16" Chamfer Mill 60 Degree Straight Point Double End Flat Tip, 2 Flute, Carbide, AlTiN, TITAN, LOC=.137" OAL=2-1/2" SHK=3/16" TIP DIA=.030"
$47.59
27
""
3/8"
5/8"
3/8"
2"
N/A
4
3/8" Square End Mill Carbide 4 Flute 30° Helix Stub Length Uncoated GWS DIA=3/8" LOC=5/8" OAL=2" SHK=3/8"
$21.91

Call

TITAN USA Chamfer Mill Series 853
1/8"
.072"
1/8"
1-1/2"
N/A
2
1/8" Chamfer Mill 82 Degree Straight Point Single End Flat Tip, 2 Flute, Carbide, AlTiN, TITAN, LOC=.072" OAL=1-1/2" SHK=1/8" TIP DIA=.010"
$21.20
28
TITAN USA Square End Mill Series 950
7/16"
2"
7/16"
4"
N/A
2
7/16" Square End Mill Carbide 2 Flute 30° Helix Long Length TiCN Coated TITAN DIA=7/16" LOC=2" OAL=4" SHK=7/16"
$64.72
24
TITAN USA VI-PRO End Mill Series V42RR
1"
2"
1"
4"
.030"
4
1" Corner Radius End Mill VI-Pro Carbide 4 Flute Vari Index Standard Length AlCrN Coated TITAN CR=.030" LOC=2" OAL=4" SHK=1"
$441.25
22
Micro Ball End Mill: 3 Flute, Long Reach, Stub Length
0.040"
0.060"
1/8"
2-1/2"
Ball
0.325"
3
0.040" Micro Ball End Mill Long Reach Carbide 3 Flute 30° Helix Stub Length AlTiN Coated TITAN LOC=0.060" OAL=2-1/2" SHK=1/8" NL=0.325"
$42.20
14
TITAN USA Square End Mill Series 974
5/8"
3"
5/8"
6"
N/A
3
5/8" Square End Mill Carbide 3 Flute 30° Helix Extra Long Length TiCN Coated TITAN DIA=5/8" LOC=3" OAL=6" SHK=5/8"
$193.72
15
Square End Mill: Carbide, 3 Flute, Standard Length
3/8"
1"
3/8"
2-1/2"
N/A
3
3/8" Square End Mill Carbide 3 Flute 30° Helix Standard Length AlTiN Coated TITAN DIA=3/8" LOC=1" OAL=2-1/2" SHK=3/8"
$32.79
22
Micro Square End Mill: 4 Flute, Standard Length
0.115"
0.345"
1/8"
1-1/2"
N/A
4
0.115" Micro Square End Mill Carbide 4 Flute 30° Helix Standard Length Uncoated TITAN DIA=0.115" LOC=0.345" OAL=1-1/2" SHK=1/8"
$17.91
88
2 Flute Carbide Square End Mills, Long Reach, AlTiN Coated, GWS Tool Group Series 202
1"
1-1/2"
1"
6"
N/A
2
1" Square End Mill Carbide 2 Flute 30° Helix Long Reach Length AlTiN Coated GWS DIA=1" LOC=1-1/2" OAL=6" SHK=1"
$413.88

Call

Micro Ball End Mill: 3 Flute, Long Reach, Long Length
0.040"
0.200"
1/8"
2-1/2"
Ball
0.400"
3
0.040" Micro Ball End Mill Long Reach Carbide 3 Flute 30° Helix Long Length AlTiN Coated TITAN LOC=0.200" OAL=2-1/2" SHK=1/8" NL=0.400"
$58.98
1
Micro Ball End Mill: 3 Flute, Long Reach, Standard Length
0.035"
0.105"
1/8"
2-1/2"
Ball
0.420"
3
0.035" Micro Ball End Mill Long Reach Carbide 3 Flute 30° Helix Standard Length AlTiN Coated TITAN LOC=0.105" OAL=2-1/2" SHK=1/8" NL=0.420"
$62.86
15
TITAN USA Square End Mill Series 174
3/8"
1-1/2"
3/8"
6"
N/A
3
3/8" Square End Mill Carbide 3 Flute 30° Helix Extra Long Length AlTiN Coated TITAN DIA=3/8" LOC=1-1/2" OAL=6" SHK=3/8"
$76.85
46
Micro Square End Mill: 3 Flute, Long Reach, Standard Length
0.071"
0.213"
1/8"
1-1/2"
Ball
2
0.071" Micro Ball End Mill Carbide 2 Flute 30° Helix Standard Length AlTiN Coated TITAN DIA=0.071" LOC=0.213" OAL=1-1/2" SHK=1/8"
$27.71
13
TITAN USA VI-PRO End Mill Series V52S
5/8"
3/4"
5/8"
3"
N/A
5
5/8" Square End Mill VI-Pro Carbide 5 Flute Vari Index Stub Length AlCrN Coated TITAN LOC=3/4" OAL=3" SHK=5/8"
$162.37
39
TITAN USA Corner Radius End Mill Series 746
3/8"
1-3/4"
3/8"
4"
.015"
4
3/8" Corner Radius End Mill Carbide 4 Flute 30° Helix Extra Long Length AlTiN Coated TITAN LOC=1-3/4" OAL=4" SHK=3/8" CR=.015"
$62.62
24
 
7555 Products: Page 19 of 303
Products per Page:
≪◂
123 ... 17182021 ... 301302303
▸≫
7555 Products: Page 17 of 252
""
202-001132
$21.01

Call

1/4" Square End Mill Carbide 2 Flute 30° Helix Stub Length TiCN Coated GWS DIA=1/4" LOC=1/2" OAL=2" SHK=1/4"
Qty
Micro Square End Mill: 2 Flute, Standard Length
TC56209
$42.09
Available:
19
0.009" Micro Square End Mill Carbide 2 Flute 30° Helix Standard Length AlTiN Coated TITAN DIA=0.009" LOC=0.027" OAL=1-1/2" SHK=1/8"
Qty
Micro Ball End Mill: 3 Flute, Long Reach, Stub Length
TC55800
$41.39
Available:
9
0.045" Micro Ball End Mill Long Reach Carbide 3 Flute 30° Helix Stub Length AlTiN Coated TITAN LOC=0.067" OAL=2-1/2" SHK=1/8" NL=0.225"
Qty
Micro Square End Mill: 3 Flute, Long Reach, Standard Length
TC57430
$44.57
Available:
15
0.025" Micro Square End Mill Carbide 3 Flute 30° Helix Standard Length Long Reach Uncoated TITAN LOC=0.075" OAL=2-1/2" SHK=1/8" NL=0.203"
Qty
TITAN USA Corner Radius End Mill Series 739
TC73924
$28.18
Available:
101
1/4" Corner Radius End Mill Carbide 4 Flute 30° Helix Stub Length AlTiN Coated TITAN LOC=1/2" OAL=2" SHK=1/4" CR=.060"
Qty
TITAN USA VI-PRO End Mill Series V52LR
TC27265
$140.63
Available:
23
1/2" Corner Radius End Mill VI-Pro Carbide 5 Flute Vari Index Long Length AlCrN Coated Weldon Shank TITAN CR=.060" LOC=2" OAL=4" SHK=1/2"
Qty
TITAN USA Square End Mill Series 151
TC15124
$44.92
Available:
24
3/8" Square End Mill Carbide 2 Flute 30° Helix Long Length AlTiN Coated TITAN DIA=3/8" LOC=1-1/8" OAL=3" SHK=3/8"
Qty
TITAN USA Corner Radius End Mill Series 746
TC74619
$56.54
Available:
60
5/16" Corner Radius End Mill Carbide 4 Flute 30° Helix Extra Long Length AlTiN Coated TITAN LOC=1-5/8" OAL=4" SHK=5/16" CR=.030"
Qty
Micro Square End Mill: 3 Flute, Long Reach, Standard Length
TC57761
$37.67
Available:
15
0.035" Micro Square End Mill Carbide 3 Flute 30° Helix Standard Length Long Reach AlTiN Coated TITAN LOC=0.105" OAL=2-1/2" SHK=1/8" NL=0.425"
Qty
Ball End Mill for Aluminum: Carbide, 3 Flute, Standard Length
TC63153
$554.75
Available:
9
1" Ball End Mill For Aluminum Carbide 3 Flute 45° Helix Standard Length ZrN Coated TITAN DIA=1" LOC=1-3/4" OAL=4" SHK=1"
Qty
Micro Square End Mill: 3 Flute, Long Reach, Standard Length
TC57249
$20.00
Available:
14
0.049" Micro Ball End Mill Carbide 2 Flute 30° Helix Standard Length AlTiN Coated TITAN DIA=0.049" LOC=0.147" OAL=1-1/2" SHK=1/8"
Qty
Micro Ball End Mill: 3 Flute, Long Reach, Stub Length
TC55848
$41.27
Available:
1
0.060" Micro Ball End Mill Long Reach Carbide 3 Flute 30° Helix Stub Length AlTiN Coated TITAN LOC=0.090" OAL=2-1/2" SHK=1/8" NL=0.312"
Qty
TITAN USA Ball End Mill Series 181
TC18148
$246.65
Available:
8
3/4" Ball End Mill Carbide 2 Flute 30° Helix Extra Long Length AlTiN Coated TITAN DIA=3/4" LOC=3" OAL=6" SHK=3/4"
Qty
TITAN USA VI-PRO End Mill Series V62RR
TC67116
$37.32
Available:
62
1/4" Corner Radius End Mill VI-Pro Carbide 6 Flute Vari Index Standard Length AlCrN Coated TITAN CR=.015" LOC=3/4" OAL=2-1/2" SHK=1/4"
Qty
TITAN USA Roughing End Mill Series 206
TC20608
$36.74
Available:
51
1/8" Roughing End Mill Fine Pitch Carbide 4 Flute 30° Helix Long Length Uncoated TITAN DIA=1/8" LOC=3/4" OAL=2-1/4" SHK=1/8"
Qty
""
206-001203A
$56.29

Call

1/2" Square End Mill Carbide 4 Flute 30° Helix Standard Length AlTiN Coated GWS DIA=1/2" LOC=1-1/4" OAL=3" SHK=1/2"
Qty
Micro Square End Mill: 3 Flute, Long Length
TC53612
$74.09
Available:
46
0.025" Micro Square End Mill Carbide 3 Flute 30° Helix Extra Long AlTiN Coated TITAN DIA=0.025" LOC=0.203" OAL=2-1/2" SHK=1/8"
Qty
TITAN USA Roughing End Mill Series 298
TC29848
$360.07
Available:
43
3/4" Roughing-Finishing End Mill Carbide 4 Flute Standard Length AlTiN Coated Weldon Shank TITAN CR=.040" LOC=1-5/8" OAL=4" SHK=3/4"
Qty
Ball End Mill: Carbide, 3 Flute, Stub Length
TC92012
$21.20
Available:
74
3/16" Ball End Mill Carbide 3 Flute 30° Helix Stub Length TiCN Coated TITAN DIA=3/16" LOC=3/8" OAL=2" SHK=3/16"
Qty
High Performance End Mill M A Ford Series 177
17778707A
$336.70
Available:
60
20mm Corner Radius End Mill TuffCutt®XR Carbide 4 Flute Standard AlTiN Coated MA Ford CR=3.0mm LOC=38mm OAL=104mm SHK=20.0mm
Qty
Ball End Mill: Carbide, 3 Flute, Extra Long
TC18333
$117.96
Available:
129
1/2" Ball End Mill Carbide 3 Flute 30° Helix Extra Long Length Uncoated TITAN DIA=1/2" LOC=1-1/2" OAL=6" SHK=1/2"
Qty
TITAN USA Chamfer Mill Series 853
TC85350
$28.49
Available:
78
3/16" Chamfer Mill 120 Degree Straight Point Single End Flat Tip, 2 Flute, Carbide, AlTiN, TITAN, LOC=.054" OAL=2-1/2" SHK=3/16" TIP DIA=.010"
Qty
TITAN USA Corner Radius End Mill Series 720
TC71990
$93.20
Available:
173
1/2" Corner Radius End Mill Carbide 2 Flute 30° Helix Long Length Uncoated TITAN LOC=2" OAL=4" SHK=1/2" CR=.125"
Qty
TITAN USA Square End Mill Series 905
TC90507
$14.85
Available:
62
7/64" Square End Mill Carbide 4 Flute 30° Helix Standard Length TiCN Coated TITAN DIA=7/64" LOC=3/8" OAL=1-1/2" SHK=1/8"
Qty
Micro Ball End Mill: 4 Flute, Standard Length
TC59265
$26.97
Available:
114
0.065" Micro Ball End Mill Carbide 4 Flute 30° Helix Standard Length AlTiN Coated TITAN DIA=0.065" LOC=0.195" OAL=1-1/2" SHK=1/8"
Qty
Micro Square End Mill: 3 Flute, Long Reach, Long Length
TC54650
$42.98
Available:
57
0.010" Micro Square End Mill Carbide 3 Flute 30° Helix Long Length Long Reach Uncoated TITAN LOC=0.050" OAL=2-1/2" SHK=1/8" NL=0.100"
Qty
TITAN USA VI-PRO End Mill Series V42L
TC23331
$110.95
Available:
13
1/2" Square End Mill VI-Pro Carbide 4 Flute Vari Index Long Length AlCrN Coated TITAN Weldon Flat LOC=1-1/2" OAL=4" SHK=1/2"
Qty
Square End Mill: Carbide , 4 Flute
TC10505
$11.63
Available:
1325
5/64" Square End Mill Carbide 4 Flute 30° Helix Standard Length Uncoated TITAN DIA=5/64" LOC=1/4" OAL=1-1/2" SHK=1/8"
Qty
TITAN USA Aluminum End Mill Series 646
TC62392
$21.86
Available:
118
1/8" Corner Radius End Mill For Aluminum Carbide 2 Flute 45° Helix Standard Length Uncoated TITAN CR=.030" LOC=1/2" OAL=1-1/2" SHK=1/8"
Qty
TITAN USA Aluminum End Mill Series 633
TC63324
$90.72
Available:
11
3/8" Square End Mill For Aluminum Carbide 2 Flute 45° Helix Long Length ZrN Coated TITAN DIA=3/8" LOC=1-1/2" OAL=4" SHK=3/8"
Qty
7555 Products: Page 17 of 252
End Mill Dimensions
End Mill Dimensions
End Type
End Type
Number Of Flutes
Number Of Flutes
Coatings
Coatings

Achieve Exceptional Milling Results with Carbide End Mills

Industrial machinists and hobbyists alike rely on carbide end mills to achieve superior results in their metalworking projects.  These rotary cutting tools are crafted from ultra-hard, wear-resistant carbide, delivering unmatched performance and  durability:

  • Uncompromised Performance: Carbide end mills effortlessly machine a broad range of materials, including various metals, plastics, and composites. Their exceptional hardness allows for aggressive cutting speeds and feeds, maximizing machining efficiency.
  • Extended Tool Life: Compared to high-speed steel end mills, carbide tools boast significantly extended lifespans. This translates to less frequent tool changes, reduced downtime, and lower overall production costs.
  • Precision and Surface Finish: The inherent rigidity and sharpness of carbide translate to precise cutting and exceptional surface finishes. This minimizes the need for additional finishing steps, saving both time and resources.
  • Unparalleled Versatility: Carbide end mills come in a vast array of sizes, flute configurations (referring to the number of cutting edges), and tip geometries. This extensive selection ensures you can find the perfect tool for any application, from large-scale roughing operations to intricate detail work.

By incorporating carbide end mills into your metalworking operations, you can achieve superior cutting performance, exceptional tool life, and a new level of efficiency in your projects.

Carbide End Mill Categories

Carbide Square End Mills

Carbide Ball End Mills
Carbide Corner Radius End Mills Variable Pitch Carbide End Mills
Carbide Roughing End Mills Solid Carbide Drill End Mills
   

Anatomy Of A Carbide End Mill

Core Diameter: The diameter measured tangent from bottom of all flutes.  This diameter dictates the strength of your end mill.
Cutting Diameter: Measured from margin-to-margin on cutting end of tool. An even number of flutes can be measured 180º apart.

Dish Angle: Angle perpendicular to centerline of tool and allows proper end cut characteristics and reduces full diameter contact.
Flute Wash: Amount of non-cutting flute area past the length of cut.
Gash Angle: The secondary cuts on a tool to provide chip space at corners and ends. The space forming the end cutting edge, which is used when feeding axially.
Helix Angle: This is the angle formed by a line tangent to the angle of the flute grind and parallel to the centerline of the cutting tool.
Primary Land: The narrow surface of a profile sharpened cutter tooth immediately behind the cutting edge.
Length of Cut (LOC): This is the actual cutting depth of the tool in the axial direction.

Neck Length (NL): A measurement taken from tip of the tool to the base of the neck (when present).

Overall Length (OAL): A measurement taken from end-to-end of the tool.

Radial Relief: Area where cutting face is relieved behind the cutting edge in order to avoid rubbing while maintaining maximum edge strength. We offer 2 types of Radial Relief:

Standard Relief - General purpose relief shape consisting of a primary and secondary grind behind the cutting edge.

Eccentric Relief - A strong high performance edge design for ferrous and tough material cutting consisting of a primary relief measured radially along its edge.

Pitch:  This is an equal angular measurement from flute-to-flute. If the tool is a variable index style then this spacing is unequal.
Radial Rake: The angle of the rake face measured from center of the tool.
Shank Diameter: The end of the tool that is held in the holder and requires a high degree of accuracy and concentricity.
Weldon Flat: The flat on the shank provides positive driving surface for the milling bit.

End Mill Dimensions Detailed