End Mills / Carbide End Mills

Jump to Top of Filters

Carbide End Mills

Carbide End Mills

Find Your High Quality Carbide End Mills Below

 

Reset All Filters
7555 Products: Page 275 of 303
Products per Page:
≪◂
123 ... 273274276277 ... 301302303
▸≫
 
Image
SKU #
DIA
----
LOC
SHK
----
OAL
CR
----
NL
Flutes
-------
Angle
Description
Price $
--------
QTY OH
QTY
Micro Corner Radius End Mill: 4 Flute, Standard Length
0.047"
0.141"
1/8"
1-1/2"
.010"
4
0.047" Micro Corner Radius End Mill Carbide 4 Flute 30° Helix Standard Length AlTiN Coated TITAN CR=0.010" LOC=0.141" OAL=1-1/2" SHK=1/8"
$43.71
23
Micro Ball End Mill: 3 Flute, Long Reach, Stub Length
0.062"
0.093"
1/8"
2-1/2"
Ball
0.500"
3
0.062" Micro Ball End Mill Long Reach Carbide 3 Flute 30° Helix Stub Length AlTiN Coated TITAN LOC=0.093" OAL=2-1/2" SHK=1/8" NL=0.500"
$57.94
16
Micro Ball End Mill: 3 Flute, Long Reach, Stub Length
0.060"
0.090"
1/8"
2-1/2"
Ball
0.720"
3
0.060" Micro Ball End Mill Long Reach Carbide 3 Flute 30° Helix Stub Length Uncoated TITAN LOC=0.090" OAL=2-1/2" SHK=1/8" NL=0.720"
$38.13
24
4 Flute Extra Extra Long End Mill GWSToolGroup Series 203
1"
5"
1"
8"
N/A
4
1" Square End Mill Carbide 4 Flute 30° Helix Extra Extra Long Length AlTiN Coated GWS DIA=1" LOC=5" OAL=8" SHK=1"
$646.17

Call

Square End Mill For Aluminum: Carbide, 2 Flute, Standard Length
3/8"
1"
3/8"
2-1/2"
N/A
2
3/8" Square End Mill For Aluminum Carbide 2 Flute 45° Helix Standard Length ZrN Coated TITAN DIA=3/8" LOC=1" OAL=2-1/2" SHK=3/8"
$51.04
28
TITAN USA Roughing End Mill Series 296
1/4"
1-1/2"
1/4"
4"
N/A
4
1/4" Roughing End Mill Fine Pitch Carbide 4 Flute 30° Helix Extra Long Length AlTiN Coated TITAN DIA=1/4" LOC=1-1/2" OAL=4" SHK=1/4"
$69.99
85
TITAN USA Aluminum End Mill Series 658
3/16"
5/8"
3/16"
2"
.010"
3
3/16" Corner Radius End Mill For Aluminum Carbide 3 Flute 45° Helix Standard Length Uncoated TITAN CR=.010" LOC=5/8" OAL=2" SHK=3/16"
$30.77
115
TITAN USA Square End Mill Series 153
3/8"
1"
3/8"
4"
N/A
3
3/8" Square End Mill Carbide 3 Flute 30° Helix Long Length Uncoated TITAN DIA=3/8" LOC=1" OAL=4" SHK=3/8"
$40.27
94
Micro Corner Radius End Mill: 4 Flute, Stub Length
0.078"
0.117"
1/8"
1-1/2"
.015"
4
0.078" Micro Corner Radius End Mill Carbide 4 Flute 30° Helix Stub Length Uncoated TITAN CR=0.015" LOC=0.117" OAL=1-1/2" SHK=1/8"
$27.05
179
Square End Mill: Carbide, 2 Flute, Stub Length
7/16"
5/8"
7/16"
2-1/2"
N/A
2
7/16" Square End Mill Carbide 2 Flute 30° Helix Stub Length TiCN Coated TITAN DIA=7/16" LOC=5/8" OAL=2-1/2" SHK=7/16"
$42.71
11
TITAN USA Aluminum End Mill Series 659
3/16"
5/8"
3/16"
2"
.030"
3
3/16" Corner Radius End Mill For Aluminum Carbide 3 Flute 45° Helix Standard Length ZrN Coated TITAN CR=.030" LOC=5/8" OAL=2" SHK=3/16"
$37.01
77
TITAN USA Corner Radius End Mill Series 720
3/8"
5/8"
3/8"
2"
.060"
2
3/8" Corner Radius End Mill Carbide 2 Flute 30° Helix Stub Length Uncoated TITAN LOC=5/8" OAL=2" SHK=3/8" CR=.060"
$34.30
211
Square End Mill, Carbide, 4 Flute
11/32"
1"
3/8"
2-1/2"
N/A
4
11/32" Square End Mill Carbide 4 Flute 30° Helix Standard Length AlTiN Coated TITAN DIA=11/32" LOC=1" OAL=2-1/2" SHK=3/8"
$43.75
45
TITAN USA Corner Radius End Mill Series 745
1/4"
1-1/2"
1/4"
4"
.020"
4
1/4" Corner Radius End Mill Carbide 4 Flute 30° Helix Extra Long Length Uncoated TITAN LOC=1-1/2" OAL=4" SHK=1/4" CR=.020"
$34.45
123
Micro Square End Mill: 3 Flute, Long Reach, Stub Length
0.100"
0.150"
1/8"
2-1/2"
N/A
0.500"
3
0.100" Micro Square End Mill Carbide 3 Flute 30° Helix Stub Length Long Reach Uncoated TITAN LOC=0.150" OAL=2-1/2" SHK=1/8" NL=0.500"
$31.59
44
TITAN USA Square End Mill Series 155
5/8"
2-1/4"
5/8"
5"
N/A
4
5/8" Square End Mill Carbide 4 Flute 30° Helix Long Length Uncoated TITAN DIA=5/8" LOC=2-1/4" OAL=5" SHK=5/8"
$160.74
172
TITAN USA Chamfer Mill Series 850
3/8"
.132"
3/8"
2-1/2"
N/A
2
3/8" Chamfer Mill 100 Degree Straight Point Single End Flat Tip, 2 Flute, Carbide, Uncoated, TITAN, LOC=.132" OAL=2-1/2" SHK=3/8" TIP DIA=.060"
$44.26
44
TITAN USA Corner Radius End Mill Series 743
5/16"
1-1/8"
5/16"
3"
.045"
4
5/16" Corner Radius End Mill Carbide 4 Flute 30° Helix Long Length Uncoated TITAN LOC=1-1/8" OAL=3" SHK=5/16" CR=.045"
$36.58
216
Ball End Mill: Carbide, 4 Flute, Stub Length
5/64"
1/8"
1/8"
1-1/2"
Ball
4
5/64" Ball End Mill Carbide 4 Flute 30° Helix Stub Length AlTiN Coated TITAN DIA=5/64" LOC=1/8" OAL=1-1/2" SHK=1/8"
$23.18
23
TITAN USA Corner Radius End Mill Series 720
3/4"
1-1/2"
3/4"
4"
.060"
2
3/4" Corner Radius End Mill Carbide 2 Flute 30° Helix Standard Length Uncoated TITAN LOC=1-1/2" OAL=4" SHK=3/4" CR=.060"
$181.82
32
TITAN USA Corner Radius End Mill Series 745
1"
3"
1"
6"
.045"
4
1" Corner Radius End Mill Carbide 4 Flute 30° Helix Extra Long Length Uncoated TITAN LOC=3" OAL=6" SHK=1" CR=.045"
$476.75

Call

TITAN USA Square End Mill Series 955
1"
2-1/4"
1"
5"
N/A
4
1" Square End Mill Carbide 4 Flute 30° Helix Long Length TiCN Coated TITAN DIA=1" LOC=2-1/4" OAL=5" SHK=1"
$284.70
5
2 Flute Carbide Square End Mills, Standard Length, Uncoated, GWS Tool Group Series 202
15/32"
1"
1/2"
3"
N/A
2
15/32" Square End Mill Carbide 2 Flute 30° Helix Standard Length Uncoated GWS DIA=15/32" LOC=1" OAL=3" SHK=1/2"
$42.65

Call

TITAN USA Aluminum End Mill Series 632
1/2"
2"
1/2"
4"
N/A
2
1/2" Square End Mill For Aluminum Carbide 2 Flute 45° Helix Long Length Uncoated TITAN DIA=1/2" LOC=2" OAL=4" SHK=1/2"
$136.44
106
Square End Mill, Carbide, 4 Flute
11/64"
5/8"
3/16"
2"
N/A
4
11/64" Square End Mill Carbide 4 Flute 30° Helix Standard Length AlTiN Coated TITAN DIA=11/64" LOC=5/8" OAL=2" SHK=3/16"
$19.19
123
 
7555 Products: Page 275 of 303
Products per Page:
≪◂
123 ... 273274276277 ... 301302303
▸≫
7555 Products: Page 12 of 252
Micro Square End Mill: 3 Flute, Long Reach, Standard Length
TC57827
$35.93
Available:
17
0.065" Micro Square End Mill Carbide 3 Flute 30° Helix Standard Length Long Reach AlTiN Coated TITAN LOC=0.195" OAL=2-1/2" SHK=1/8" NL=0.325"
Qty
Micro Square End Mill: 4 Flute, Stub Length
TC54220
$28.91
Available:
114
0.020" Micro Square End Mill Carbide 4 Flute 30° Helix Stub Length AlTiN Coated TITAN DIA=0.020" LOC=0.030" OAL=1-1/2" SHK=1/8"
Qty
Micro Ball End Mill: 3 Flute, Long Reach, Standard Length
TC58857
$61.04
Available:
16
0.078" Micro Ball End Mill Long Reach Carbide 3 Flute 30° Helix Standard Length AlTiN Coated TITAN LOC=0.234" OAL=2-1/2" SHK=1/8" NL=0.624"
Qty
2 Flute Carbide Square End Mills, Standard Length, TiCN Coated, GWS Tool Group Series 202
204-001003
$12.48

Call

1/32" Square End Mill Carbide 2 Flute 30° Helix Standard Length TiCN Coated GWS DIA=1/32" LOC=1/8" OAL=1-1/2" SHK=1/8"
Qty
""
206-001285
$8.39

Call

1.5mm Square End Mill Carbide 4 Flute 30° Helix Standard Length Uncoated GWS DIA=1.5mm LOC=5mm OAL=39mm SHK=3mm
Qty
Ball End Mill for Aluminum: Carbide, 3 Flute, Standard Length
TC63150
$111.84
Available:
13
1/2" Ball End Mill For Aluminum Carbide 3 Flute 45° Helix Standard Length ZrN Coated TITAN DIA=1/2" LOC=1-1/4" OAL=3" SHK=1/2"
Qty
TITAN USA Aluminum End Mill Series 630
TC63002
$22.32
Available:
83
3/16" Square End Mill For Aluminum Carbide 3 Flute 45° Helix Stub Length ZrN Coated TITAN
Qty
TITAN USA Aluminum End Mill Series 657
TC65421
$261.22
Available:
19
3/4" Corner Radius End Mill For Aluminum Carbide 3 Flute 45° Helix Stub Length Uncoated TITAN CR=.030" LOC=1" OAL=3" SHK=3/4"
Qty
TITAN USA Square End Mill Series 950
TC95040
$179.46
Available:
8
5/8" Square End Mill Carbide 2 Flute 30° Helix Long Length TiCN Coated TITAN DIA=5/8" LOC=2-1/4" OAL=5" SHK=5/8"
Qty
Drill Mill: Carbide, 120 Degree Point, 4 Flute
TC35112
$31.28
Available:
14
3/16" Drill Mill 120 Degree Point Carbide 4 Flute 30° Helix AlTiN Coated TITAN DIA=3/16" LOC=5/8" OAL=2" SHK=3/16"
Qty
Micro Ball End Mill: 4 Flute, Stub Length
TC55100
$22.56
Available:
118
0.100" Micro Ball End Mill Carbide 4 Flute 30° Helix Stub Length Uncoated TITAN DIA=0.100" LOC=0.150" OAL=1-1/2" SHK=1/8"
Qty
TITAN USA VI-PRO End Mill Series V42S
TC21151
$147.64
Available:
25
5/8" Square End Mill VI-Pro Carbide 4 Flute Vari Index Stub Length AlCrN Coated TITAN LOC=3/4" OAL=3" SHK=5/8"
Qty
Ball End Mill for Aluminum: Carbide, 2 Flute, Long Length
TC63073
$82.00
Available:
134
5/16" Ball End Mill For Aluminum Carbide 2 Flute 45° Helix Long Length Uncoated TITAN DIA=5/16" LOC=1-3/8" OAL=3" SHK=5/16"
Qty
Micro Corner Radius End Mill: 4 Flute, Stub Length
TC50207
$38.13
Available:
70
0.025" Micro Corner Radius End Mill Carbide 4 Flute 30° Helix Stub Length Uncoated TITAN CR=0.005" LOC=0.038" OAL=1-1/2" SHK=1/8"
Qty
TITAN USA Chamfer Mill Series 856
TC87793
$28.45
Available:
75
3/16" Chamfer Mill 82 Degree Straight Point Single End Flat Tip, 4 Flute, Carbide, AlTiN, TITAN, LOC=.091" OAL=2-1/2" SHK=3/16" TIP DIA=.030"
Qty
Ball End Mill for Aluminum: Carbide, 3 Flute, Long Length
TC63163
$89.17
Available:
47
5/16" Ball End Mill For Aluminum Carbide 3 Flute 45° Helix Long Length ZrN Coated TITAN DIA=5/16" LOC=1-3/8" OAL=3" SHK=5/16"
Qty
Drill Mill: Carbide, 60 Degree Point, 4 Flute
TC34916
$39.18
Available:
52
1/4" Drill Mill 60 Degree Point Carbide 4 Flute 30° Helix AlTiN Coated TITAN DIA=1/4" LOC=3/4" OAL=2-1/2" SHK=1/4"
Qty
Micro Ball End Mill: 4 Flute, Standard Length
TC59229
$29.42
Available:
8
0.029" Micro Ball End Mill Carbide 4 Flute 30° Helix Standard Length AlTiN Coated TITAN DIA=0.029" LOC=0.087" OAL=1-1/2" SHK=1/8"
Qty
Ball End Mill: Carbide, 3 Flute, Stub Length
TC12308
$14.15
Available:
28
1/8" Ball End Mill Carbide 3 Flute 30° Helix Stub Length AlTiN Coated TITAN DIA=1/8" LOC=1/4" OAL=1-1/2" SHK=1/8"
Qty
Micro Ball End Mill: 4 Flute, Standard Length
TC59098
$22.48
Available:
58
0.098" Micro Ball End Mill Carbide 4 Flute 30° Helix Standard Length Uncoated TITAN DIA=0.098" LOC=0.294" OAL=1-1/2" SHK=1/8"
Qty
TITAN USA Square End Mill Series 174
TC17456
$497.59
Available:
12
7/8" Square End Mill Carbide 3 Flute 30° Helix Extra Long Length AlTiN Coated TITAN DIA=7/8" LOC=3" OAL=6" SHK=7/8"
Qty
High Performance End Mill M A Ford Series 177L
177L4720R118N5A
$133.16
Available:
42
12mm Corner Radius End Mill TuffCutt®XR Carbide 4 Flute Long Reach AlTiN Coated MA Ford CR=3.0mm LOC=24mm OAL=152mm SHK=12mm
Qty
Micro Corner Radius End Mill: 4 Flute, Standard Length
TC50659
$37.36
Available:
230
0.062" Micro Corner Radius End Mill Carbide 4 Flute 30° Helix Standard Length Uncoated TITAN CR=0.015" LOC=0.186" OAL=1-1/2" SHK=1/8"
Qty
TITAN USA Roughing End Mill Series 226
TC29887
$87.23
Available:
180
1/4" Roughing-Finishing End Mill Carbide 4 Flute 40° Helix Extra Long Length AlTiN Coated TITAN CR=.020" LOC=1-1/2" OAL=4" SHK=1/4"
Qty
Ball End Mill: Carbide, 4 Flute, Long Length
TC16540
$189.53
Available:
86
5/8" Ball End Mill Carbide 4 Flute 30° Helix Long Length Uncoated TITAN DIA=5/8" LOC=2-1/4" OAL=5" SHK=5/8"
Qty
TITAN USA Corner Radius End Mill Series 738
TC73850
$58.28
Available:
299
1/2" Corner Radius End Mill Carbide 4 Flute 30° Helix Stub Length Uncoated TITAN LOC=5/8" OAL=2-1/2" SHK=1/2" CR=.030"
Qty
Square End Mill: Carbide, 2 Flute, Standard Length
TC10115
$29.84
Available:
13
15/64" Square End Mill Carbide 2 Flute 30° Helix Standard Length AlTiN Coated TITAN DIA=15/64" LOC=3/4" OAL=2-1/2" SHK=1/4"
Qty
Micro Square End Mill: 3 Flute, Long Reach, Standard Length
TC57218
$24.65
Available:
24
0.018" Micro Ball End Mill Carbide 2 Flute 30° Helix Standard Length AlTiN Coated TITAN DIA=0.018" LOC=0.054" OAL=1-1/2" SHK=1/8"
Qty
TITAN USA Corner Radius End Mill Series 720
TC72075
$181.82
Available:
30
3/4" Corner Radius End Mill Carbide 2 Flute 30° Helix Standard Length Uncoated TITAN LOC=1-1/2" OAL=4" SHK=3/4" CR=.030"
Qty
TITAN USA Square End Mill Series 975
TC97548
$283.11
Available:
27
3/4" Square End Mill Carbide 4 Flute 30° Helix Extra Long Length TiCN Coated TITAN DIA=3/4" LOC=3" OAL=6" SHK=3/4"
Qty
7555 Products: Page 12 of 252
End Mill Dimensions
End Mill Dimensions
End Type
End Type
Number Of Flutes
Number Of Flutes
Coatings
Coatings

Achieve Exceptional Milling Results with Carbide End Mills

Industrial machinists and hobbyists alike rely on carbide end mills to achieve superior results in their metalworking projects.  These rotary cutting tools are crafted from ultra-hard, wear-resistant carbide, delivering unmatched performance and  durability:

  • Uncompromised Performance: Carbide end mills effortlessly machine a broad range of materials, including various metals, plastics, and composites. Their exceptional hardness allows for aggressive cutting speeds and feeds, maximizing machining efficiency.
  • Extended Tool Life: Compared to high-speed steel end mills, carbide tools boast significantly extended lifespans. This translates to less frequent tool changes, reduced downtime, and lower overall production costs.
  • Precision and Surface Finish: The inherent rigidity and sharpness of carbide translate to precise cutting and exceptional surface finishes. This minimizes the need for additional finishing steps, saving both time and resources.
  • Unparalleled Versatility: Carbide end mills come in a vast array of sizes, flute configurations (referring to the number of cutting edges), and tip geometries. This extensive selection ensures you can find the perfect tool for any application, from large-scale roughing operations to intricate detail work.

By incorporating carbide end mills into your metalworking operations, you can achieve superior cutting performance, exceptional tool life, and a new level of efficiency in your projects.

Carbide End Mill Categories

Carbide Square End Mills

Carbide Ball End Mills
Carbide Corner Radius End Mills Variable Pitch Carbide End Mills
Carbide Roughing End Mills Solid Carbide Drill End Mills
   

Anatomy Of A Carbide End Mill

Core Diameter: The diameter measured tangent from bottom of all flutes.  This diameter dictates the strength of your end mill.
Cutting Diameter: Measured from margin-to-margin on cutting end of tool. An even number of flutes can be measured 180º apart.

Dish Angle: Angle perpendicular to centerline of tool and allows proper end cut characteristics and reduces full diameter contact.
Flute Wash: Amount of non-cutting flute area past the length of cut.
Gash Angle: The secondary cuts on a tool to provide chip space at corners and ends. The space forming the end cutting edge, which is used when feeding axially.
Helix Angle: This is the angle formed by a line tangent to the angle of the flute grind and parallel to the centerline of the cutting tool.
Primary Land: The narrow surface of a profile sharpened cutter tooth immediately behind the cutting edge.
Length of Cut (LOC): This is the actual cutting depth of the tool in the axial direction.

Neck Length (NL): A measurement taken from tip of the tool to the base of the neck (when present).

Overall Length (OAL): A measurement taken from end-to-end of the tool.

Radial Relief: Area where cutting face is relieved behind the cutting edge in order to avoid rubbing while maintaining maximum edge strength. We offer 2 types of Radial Relief:

Standard Relief - General purpose relief shape consisting of a primary and secondary grind behind the cutting edge.

Eccentric Relief - A strong high performance edge design for ferrous and tough material cutting consisting of a primary relief measured radially along its edge.

Pitch:  This is an equal angular measurement from flute-to-flute. If the tool is a variable index style then this spacing is unequal.
Radial Rake: The angle of the rake face measured from center of the tool.
Shank Diameter: The end of the tool that is held in the holder and requires a high degree of accuracy and concentricity.
Weldon Flat: The flat on the shank provides positive driving surface for the milling bit.

End Mill Dimensions Detailed