Versakut 1170D is an outstanding semi-synthetic cutting and grinding fluid formulated with extreme pressure additives. It is a combination of synthetic lubricants and other additives that readily disperses in water to form a clear solution that lubricates, cools, and provides excellent rust protection at recommended dilutions. Versakut 1170D also contains preservatives to control rancidity in re-circulating systems. It also has additional foam control for high pressure CNCs.
| Appearance | Turquoise |
| pH of 10% solution | 9.5-10.0 |
| Scent | Bland |
| Foaming | Low/Moderate |
| Specific Gravity | 1.01-1.03 |
| Flash Point | None |
Applications
Versakut 1170D is specially formulated for virtually all machining operations on stainless steel, cold rolled steel and other difficult ferrous metals. These applications include tapping, broaching, turning, milling, drilling, sawing, and grinding. Versakut 1170D is versatile enough to use on some non-ferrous metals with little or no stain.
Versakut 1170D is usually applied at 2% to 10% by volume with water. Tapping and broaching on difficult metals require the higher (6-15%) usage concentrations. Turning, milling, drilling, sawing, and grinding on difficult meals require the lower (3-6%) usage concentrations.
